BOSS Audio Systems BAB8 Amplified Car Subwoofer

AED 499.00
admin

BOSS Audio Systems BAB8 Amplified Car Subwoofer – 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

Category:

BOSS Audio Systems BAB8 Amplified Car Subwoofer

  • Space Saver – The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
  • Built-in Amplifier – A built-in 800 Max watt amplifier powers the subwoofer
  • Pulse Width Modulated – This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • Variable Low-Pass Filter – A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input – Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Input – Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost – Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

 

Break Your Subwoofer In

Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.

 

  • 8-inch 800-Watt subwoofer
  • Class A/B built-in amplifier
  • MOSFET power supply
  • RCA & speaker level input
  • Phase control
  • Bass boost
  • Low pass filter
  • Remote subwoofer control

 

Reviews

There are no reviews yet.

Be the first to review “BOSS Audio Systems BAB8 Amplified Car Subwoofer”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsBOSS Audio Systems BAB8 Amplified Car Subwoofer removePULSE12-V0 – 12 Inch Subwoofer removeBOSS Audio Systems CH6930 Car Speakers - 400 Watts Of Power Per Pair, 200 Watts Each, 6 x 9 Inch, Full Range, 3 Way, Sold in Pairs removeBOSS Audio Systems NX654 Car Speakers - 400 Watts Per Pair, 200 Watts Each removeBDPRO10M-V9: BlackDeath 10 Inch Pro Audio Midrange removeBOSS Audio Car Speakers - Sold in Pairs, Easy Mounting 5.25" 200 Watts CH5520 remove
ImageBOSS Audio Systems BAB8 Amplified Car SubwooferBDPRO10M-V9: BlackDeath 10 Inch Pro Audio Midrange
SKU
Rating
PriceAED 499.00AED 477.00AED 140.00AED 129.00AED 478.95AED 89.00
Stock
Availability
Add to cart

Description

BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.Chaos Exxtreme 6" x 9" 3-Way 400W Full Range Speakers. (Sold in Pairs)

BOSS Audio Systems NX654 Car Speakers - 400 Watts Per Pair, 200 Watts Each, 6.5 Inch, Full Range, 4 Way, Sold in Pairs

  • BlackDeath 10 Inch Pro Audio Midrange high output driver
  • Alloy Gasket included
  • Sold in Singles
Chaos Exxtreme 5.25" 2-Way 200W Full Range Speakers. (Sold in Pairs)
Content BOSS Audio Systems BAB8 Amplified Car Subwoofer
  • Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
  • Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
  • Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
 
Break Your Subwoofer In Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.  
  • 8-inch 800-Watt subwoofer
  • Class A/B built-in amplifier
  • MOSFET power supply
  • RCA & speaker level input
  • Phase control
  • Bass boost
  • Low pass filter
  • Remote subwoofer control
 

PULSE12-V0 - 12 Inch Subwoofer

Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.

The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.

High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.

 

Specification

  • - 350 Watts RMS
  • - 1050 Watts Peak
  • - 2100 Watts SPL (BURP)
  • - Single 4Ω
  • - Pressed paper Cone
  • - PP Dome Dustcap
  • - 1.5″ OFC Voice Coil
  • - Poly Cotton Spider
  • - Bumped Backplate
  • - Butyl Foam Surround
  • Full Range 6" x 9" 3-Way Speaker Pair
  • 400 Watts MAX 200 Watts RMS Power Handling per Pair
  • 50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
  • Poly Injection Woofer Cone and Rubber Surround
  • 1 Tweeter and 2 inch Polyimide Cone Midrange Per Speaker
  • Sold in Pairs
  • Cone Made from polyurethane, the NX654 6. 5 inch car speakers provide a resilient and durable material that can offer great sound with the advantage of long lasting speakers
  • Voice Coil Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. This gives our speakers the advantage of longer play times with lower weights
  • Surround Rubber has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear
  • Basket A die cast frame can absorb and transfer much of the energy produced by the speaker. It has good corrosion resistance, good mechanical property, high thermal and electrical conductivity and retains strength at high temperatures
  • Tweeter The dome shape radiates sound with a wider dispersion pattern than the semi dome design. Since high frequency sound waves are very directional, a wider dispersion of the sound waves will give you a larger "sweet spot".Specs Impedance: 4 Ohms, Frequency: 65 Hz to 20 kHz, Dimensions: 7" x 7" x 3", Mounting Depth: 2. 3", Mounting hole: 5. 6". BOSS Audio Systems provides a powerful 3 year platinum online dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality

Competition 10" pro audio speaker

The BDPRO10M-V9: BlackDeath 10 Inch Pro Audio Midrange woofer is designed with excellent mid-bass response in mind. A semi-pressed paper cone has high sensitivity and low moving mass for monstrous output. Dual roll cloth surround offers fast, precise dampening of the cone with great bass response. The BlackHole Dustcap increases the effective cone area for higher SPL creating extreme volume.

BlackDeath range

VIBE Audio’s BlackDeath range is all about taking things to the extreme and creating products so crazy they have no right to exist. BlackDeath isn’t just about pushing the boundaries of audio innovation, it’s about annihilating them. For many years people have been asking for coaxial and component speakers that are worthy to wear the BlackDeath logo, and after extensive development Vibe are proud to release the BlackDeath Pro Audio range. Derived from PA speaker design, BlackDeath Pro Audio speakers are capable of immense sound pressure levels, meaning volume like you’ve never heard before. Ideal for competition use or for those who just want to play their music loud and proud.  
 

Specifications

  • Model : BlackDeath Pro 8M
  • Configuration : 1 Way
  • Speaker Size : 10″ (2254mm)
  • RMS Power : 275 watts
  • Peak Power : 825 watts
  • Minimum Input : 125 watts
  • Sensitivity : 97 dB
  • Freq. Response : 55 Hz – 3.5 kHz
  • Impedance : 4 Ohm
  • Mounting Depth : 4.2″ (106mm)
  • Mounting Diameter: 9.25″ (235mm)
  • Full Range 5.25" 2-Way Speaker Pair
  • 200 Watts MAX 100 Watts RMS Power Handling per Pair
  • 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
  • Poly Injection Woofer Cone and Rubber Surround
  • 1 Tweeter Per Speaker
  • Sold in Pairs
 
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information