BOSS Audio Systems BAB8 Amplified Car Subwoofer

AED 499.00
admin

BOSS Audio Systems BAB8 Amplified Car Subwoofer – 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

Category:

BOSS Audio Systems BAB8 Amplified Car Subwoofer

  • Space Saver – The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
  • Built-in Amplifier – A built-in 800 Max watt amplifier powers the subwoofer
  • Pulse Width Modulated – This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • Variable Low-Pass Filter – A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input – Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Input – Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost – Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

 

Break Your Subwoofer In

Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.

 

  • 8-inch 800-Watt subwoofer
  • Class A/B built-in amplifier
  • MOSFET power supply
  • RCA & speaker level input
  • Phase control
  • Bass boost
  • Low pass filter
  • Remote subwoofer control

 

Reviews

There are no reviews yet.

Be the first to review “BOSS Audio Systems BAB8 Amplified Car Subwoofer”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsBOSS Audio Systems BAB8 Amplified Car Subwoofer removeBOSS Audio Systems PC65.2C 500 Watt Per Pair, 6.5 Inch, Full Range, 2 Way Car Component Speaker System with 2 Tweeters and 2 Crossovers removeBOSS Audio Car Speakers - Sold in Pairs, Easy Mounting 5.25" 200 Watts CH5520 removeBoss Audio System 508UAB removeBOSS Audio Systems Car DVD Player 6.5" 300 Watts CH6530 removeBoss Audio System BV9364B remove
ImageBOSS Audio Systems BAB8 Amplified Car Subwoofer
SKU
Rating
PriceAED 499.00AED 299.00AED 89.00AED 299.00AED 129.00AED 649.00
Stock

Out of stock

Out of stock

Out of stock

AvailabilityOut of stockOut of stockOut of stock
Add to cart

Description

BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

Phantom 6.5" 2-Way 500W Component Speakers. (Sold in Pairs)Chaos Exxtreme 5.25" 2-Way 200W Full Range Speakers. (Sold in Pairs)Single-DIN, CD/MP3 Player BluetoothChaos Exxtreme 6.5" 3-Way 300W Full Range Speakers. (Sold in Pairs)Double-DIN, DVD Player 6.2" Touchscreen Bluetooth
Content BOSS Audio Systems BAB8 Amplified Car Subwoofer
  • Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
  • Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
  • Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
 
Break Your Subwoofer In Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.  
  • 8-inch 800-Watt subwoofer
  • Class A/B built-in amplifier
  • MOSFET power supply
  • RCA & speaker level input
  • Phase control
  • Bass boost
  • Low pass filter
  • Remote subwoofer control
 
  • Component 6.5" 2-Way Speaker Pair
  • 500 Watts MAX 250 Watts RMS Power Handling per Pair
  • 65 Hz to 20 kHz Frequency Response and 94dB Sensitivity
  • Electroplate Injection Woofer Cone and Rubber Surround
  • 1 Tweeter Per Speaker
  • Sold in Pairs
  • Full Range 5.25" 2-Way Speaker Pair
  • 200 Watts MAX 100 Watts RMS Power Handling per Pair
  • 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
  • Poly Injection Woofer Cone and Rubber Surround
  • 1 Tweeter Per Speaker
  • Sold in Pairs
 
  • 50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ
  • Plays Bluetooth/CD/USB, MP3, WMA, FM/AM, Digital Media from Smart Phones
  • Compatible with Audio out from Smart Phones and MP3 Players
  • USB, Aux, Input
  • Front & Rear Pre Amp Outputs
  • Wireless Remote
  • Bluetooth Hands Free, Make and receive calls, Bluetooth Audio Streaming. Play and control music and apps like Spotify/Pandora wirelessly
  • Full Range 6.5" 3-Way Speaker Pair
  • 300 Watts MAX 150 Watts RMS Power Handling per Pair
  • 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
  • Poly Injection Woofer Cone and Rubber Surround
  • 1 Tweeter and 1 inch Polyimide Dome Midrange Per Speaker
  • Sold in Pairs
  • 80 Watts x 4 Max Power, RBDS Tuner, Balance/Fader/Bass/Treble and Preset built-in EQ
  • Plays Bluetooth/DVD/CD/USB/SD, VCD, WMA, JPEG, FM/AM, Digital Media from Smart Phones
  • Compatible with Audio out from Smart Phones and MP3 Players
  • USB, SD, Aux, AV, Rear Camera, Steering Wheel Control Input
  • Video, Front, Rear & Sub Pre Amp Outputs
  • Wireless Remote, USB Charging
  • Bluetooth Hands Free, Make and receive calls, Bluetooth Audio Streaming. Play and control music and apps like Spotify/Pandora wirelessly
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information