BOSS Audio Systems BAB8 Amplified Car Subwoofer

AED 499.00
admin

BOSS Audio Systems BAB8 Amplified Car Subwoofer – 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

Category:

BOSS Audio Systems BAB8 Amplified Car Subwoofer

  • Space Saver – The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
  • Built-in Amplifier – A built-in 800 Max watt amplifier powers the subwoofer
  • Pulse Width Modulated – This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • Variable Low-Pass Filter – A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input – Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Input – Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost – Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

 

Break Your Subwoofer In

Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.

 

  • 8-inch 800-Watt subwoofer
  • Class A/B built-in amplifier
  • MOSFET power supply
  • RCA & speaker level input
  • Phase control
  • Bass boost
  • Low pass filter
  • Remote subwoofer control

 

Reviews

There are no reviews yet.

Be the first to review “BOSS Audio Systems BAB8 Amplified Car Subwoofer”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsBOSS Audio Systems BAB8 Amplified Car Subwoofer removeBOSS Audio Single Din LED Illumination PD12LED removeBOSS Audio Systems CH6930 Car Speakers - 400 Watts Of Power Per Pair, 200 Watts Each, 6 x 9 Inch, Full Range, 3 Way, Sold in Pairs removeBOSS Audio Systems CH6920 Car Speakers - 350 Watts Of Power Per Pair And 175 Watts Each, 6 x 9 Inch, Full Range, 2 Way, Sold in Pairs, Easy Mounting removeBDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver removeBOSS Audio Systems Car DVD Player 6.5" 300 Watts CH6530 remove
ImageBOSS Audio Systems BAB8 Amplified Car SubwooferBDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver
SKU
Rating
PriceAED 499.00AED 279.00AED 140.00AED 149.00AED 259.41AED 129.00
Stock
Availability
Add to cart

Description

BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

Phantom - 10" DUAL Voice Coil (4 Ohm) 2100W Subwoofer. (Sold Single)Chaos Exxtreme 6" x 9" 3-Way 400W Full Range Speakers. (Sold in Pairs)Chaos Exxtreme 6" x 9" 2-Way 350W Full Range Speakers. (Sold in Pairs)
  • Model: BDPRO4T-V0
  • Pro Audio compression horn driver
  • 107dB Sensitivity
  • 150 Watts RMS
  • 300 Watts Max
  • 1.5kHz – 20kHz Response
Chaos Exxtreme 6.5" 3-Way 300W Full Range Speakers. (Sold in Pairs)
Content BOSS Audio Systems BAB8 Amplified Car Subwoofer
  • Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
  • Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
  • Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
 
Break Your Subwoofer In Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.  
  • 8-inch 800-Watt subwoofer
  • Class A/B built-in amplifier
  • MOSFET power supply
  • RCA & speaker level input
  • Phase control
  • Bass boost
  • Low pass filter
  • Remote subwoofer control
 
  • One 10" Woofer with DUAL 4 ohm Voice Coil
  • 2100 Watts MAX 1050 Watts RMS Power Handling
  • 88dB Sensitivity, 34 Hz Resonant Frequency
  • Poly Injection Cone and Rubber Surround
  • Works in .65 CuFt Sealed or 1 CuFt Ported enclosure
  • Full Range 6" x 9" 3-Way Speaker Pair
  • 400 Watts MAX 200 Watts RMS Power Handling per Pair
  • 50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
  • Poly Injection Woofer Cone and Rubber Surround
  • 1 Tweeter and 2 inch Polyimide Cone Midrange Per Speaker
  • Sold in Pairs
  • Full Range 6" x 9" 2-Way Speaker Pair
  • 350 Watts MAX 175 Watts RMS Power Handling per Pair
  • 50 Hz to 20 kHz Frequency Response and 92dB Sensitivity
  • Poly Injection Woofer Cone and Rubber Surround
  • 1 Tweeter Per Speaker
  • Sold in Pairs

BDPRO4T-V0 - Compression Horn Driver

Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver. The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario. The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market. We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end. Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.  
 

Specifications

  • Type – Compression driver
  • Configuration – 1-way
  • Speaker size – 4.5” (115mm)
  • Frequency Response – 1.5khz – 20Khz
  • Sensitivity – 107dB
  • RMS Power – 150 watts
  • Peak Power – 300 watts
  • Sensitivity – 105dB
  • Impedance – 8Ω
  • Mounting Depth – 2.6” (67mm)
  • Mounting Diameter – 3.5” (90mm)
  • pro audio compression driver
  • composite aluminium diaphragm
  • Torsion basket featuring snap on mounting tabs for greater installation flexibility.
  • cast aluminium housing
  • wide frequency response
  • high power y35 ferrite magnet
  • spring loaded terminals

Frequency Response

  • Full Range 6.5" 3-Way Speaker Pair
  • 300 Watts MAX 150 Watts RMS Power Handling per Pair
  • 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
  • Poly Injection Woofer Cone and Rubber Surround
  • 1 Tweeter and 1 inch Polyimide Dome Midrange Per Speaker
  • Sold in Pairs
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information