• View as:
  • Sidebar
  • Sort by:
د.إ 624.75

AVAILABILITY: In stock

د.إ 624.75

The BX5 D3 from M-Audio is a 2-way, 100W powered studio monitor designed to offer a wide frequency response and easy configuration for mixers, DJs, producers, and recordists in small control rooms, personal studios, and mobile rigs. The monitor produces a frequency response of 52 Hz to 35 kHz, thanks to two Class A/B amplifiers feeding a 5″ Kevlar woofer and 1″ silk dome tweeter.

A rear-mounted bass port delivers extended bass response, while the tweeter’s custom waveguide yields a wide sweet spot and minimized high-frequency scatter. Volume and low-frequency controls are provided so you can tune the monitor to cooperate with the sound of the room. Place the monitor on the supplied acoustic foam pad to decouple it from your table or stands, which aids in reducing unwanted bass vibrations.

The BX5 D3 can interface with a variety of equipment, via balanced XLR and balanced/unbalanced 1/4″ TRS input jacks. Setup is simple, due to the front-mounted LED, which appears brighter when you are at the ideal angle.

د.إ 1,044.75

AVAILABILITY: In stock

د.إ 1,044.75

The BX8 D3 from M-Audio is a 2-way, 150W powered studio monitor designed to offer a wide frequency response and easy configuration for mixers, DJs, producers, and recordists in small to medium control rooms, personal studios, and mobile rigs. The monitor produces a frequency response of 37 Hz to 22 kHz, thanks to two Class A/B amplifiers feeding an 8″ Kevlar woofer and a 1.25″ silk dome tweeter.

A rear-mounted bass port delivers extended bass response, while the tweeter’s custom waveguide yields a wide sweet spot and minimized high-frequency scatter. Volume and low-frequency controls are provided so you can tune the monitor to cooperate with the sound of the room. Place the monitor on the supplied acoustic foam pad to decouple it from your table or stands, which aids in reducing unwanted bass vibrations.

The BX8 D3 can interface with a variety of equipment, via balanced XLR and balanced/unbalanced 1/4″ TRS input jacks. Setup is simple, due to the front-mounted LED, which appears brighter when you are at the ideal angle.

Drivers
A magnetically shielded 8″ military-grade Kevlar woofer provides durability and detailed transient response whilst negating unwanted “cone breakup.” It has a high-temperature voice coil and damped rubber surround. The magnetically shielded 1.25″ silk dome tweeter delivers high frequencies up to 22 kHz with minimal resonance.

Enclosure
The rear-mounted bass port yields extended bass response while reducing audible air turbulence that can occur at high sound pressure levels. The tweeter sits in a custom waveguide designed to lessen scatter and yield a wide sweet spot. The process of aligning the monitor’s position is simplified, due to the front-mounted LED, which shines brightly when you’re located at the ideal angle.

Amplifiers
The BX8 D3 has two Class A/B amplifiers, an 80W low-frequency amp and a 70W high-frequency amp. A crossover at 2 kHz ensures that the correct frequencies are fed to each driver.

Controls
In addition to adjustable volume, there is a low-frequency “Acoustic Space” control. Based upon the sound of your room, you may wish to tweak the bass response to achieve a certain frequency balance.

Connectivity
The BX8 D3 can accept a balanced line-level input at its XLR 3-pin connector. Route balanced or unbalanced signals into the monitor via the 1/4″ TRS jack.

د.إ 1,081.00

AVAILABILITY: In stock

د.إ 1,081.00

The Denon SM50 is a 90W Active Reference Monitor that’s ideal for DJs who depend on quality monitors for mixing. The SM50 features a 50W 5.25″ woofer with 1.5″ voice coil and high-damping rubber, and a 40W silk-dome tweeter with 1.25″ voice coil. With an accurate frequency response from 50Hz up to 30kHz, the SM50 has plenty of high-end and low-end detail to help you hear you mixes clearly. The SM50 also features a variety of connectivity options including combo XLR and balanced 1/4″ TRS with RCA inputs.

د.إ 8,184.00

AVAILABILITY: In stock

د.إ 8,184.00

Adding 18S to your monitors will open up a new world of performance that lets you mix and master with painstaking accuracy… and deliver tracks that translate beautifully to any playback system.

د.إ 4,824.00

AVAILABILITY: In stock

د.إ 4,824.00

The 9S subwoofer is designed to complement LYD and other Dynaudio Pro studio monitors, including the classic BM range.

د.إ 6,294.00

AVAILABILITY: In stock

د.إ 6,294.00

The BM15A is a relatively large 2-way active system comprising of a large 240mm (10″) woofer, a special version of the Dynaudio ESOTEC soft dome tweeter and an electronic phase-aligned crossover, which feeds the build-in dual, high performance discrete MOSFET amplifiers.

د.إ 6,294.00

AVAILABILITY: In stock

د.إ 6,294.00

The BM15A is a relatively large 2-way active system comprising of a large 240mm (10″) woofer, a special version of the Dynaudio ESOTEC soft dome tweeter and an electronic phase-aligned crossover, which feeds the build-in dual, high performance discrete MOSFET amplifiers.

 

د.إ 4,509.00

AVAILABILITY: In stock

د.إ 4,509.00

The BM 6A features an electronic 4th order phase-aligned crossover with a crossover point at 2.2kHz, which feeds two high performance discrete MOSFET amplifiers rated at 100W each.

د.إ 2,042.00

AVAILABILITY: In stock

د.إ 2,042.00

The BM5 mkIII is the next generation of the tremendously successful BM5A MKII. With greater SPL, broader frequency and power response compared to the previous model, its ultra-high dynamic range and hand-crafted drivers deliver performance superior to many larger, more expensive monitors.

د.إ 4,929.00

AVAILABILITY: In stock

د.إ 4,929.00