BOSS Audio Systems BAB8 Amplified Car Subwoofer

AED 499.00
admin

BOSS Audio Systems BAB8 Amplified Car Subwoofer – 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

Category:

BOSS Audio Systems BAB8 Amplified Car Subwoofer

  • Space Saver – The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
  • Built-in Amplifier – A built-in 800 Max watt amplifier powers the subwoofer
  • Pulse Width Modulated – This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • Variable Low-Pass Filter – A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input – Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Input – Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost – Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

 

Break Your Subwoofer In

Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.

 

  • 8-inch 800-Watt subwoofer
  • Class A/B built-in amplifier
  • MOSFET power supply
  • RCA & speaker level input
  • Phase control
  • Bass boost
  • Low pass filter
  • Remote subwoofer control

 

Reviews

There are no reviews yet.

Be the first to review “BOSS Audio Systems BAB8 Amplified Car Subwoofer”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsBOSS Audio Systems BAB8 Amplified Car Subwoofer removeBOSS Audio Car Speakers - Sold in Pairs, Easy Mounting 5.25" 200 Watts CH5520 removeBOSS Audio Systems NX424 250 Watt Per Pair, 4 Inch, Full Range, 4 Way Car Speakers Sold in Pairs removePULSE4-V0: Pulse 4 Inch Coaxial Speaker removeBoss Audio System 508UAB removeBoss Audio System 625UAB remove
ImageBOSS Audio Systems BAB8 Amplified Car SubwooferPULSE4-V0: Pulse 4 Inch Coaxial Speaker
SKU
Rating
PriceAED 499.00AED 89.00AED 99.00AED 83.00AED 299.00AED 199.00
Stock

Out of stock

Out of stock

AvailabilityOut of stockOut of stock
Add to cart

Description

BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

Chaos Exxtreme 5.25" 2-Way 200W Full Range Speakers. (Sold in Pairs)Onyx 4" 4-Way 250W Full Range Speakers. (Sold in Pairs)
  • PULSE4-V0: Pulse 4 Inch Coaxial Speaker
  • Easy upgrade
  • Complete with grills
Single-DIN, CD/MP3 Player BluetoothSingle-DIN, MECH-LESS Multimedia Player (no CD/DVD) Detach Panel Bluetooth
Content BOSS Audio Systems BAB8 Amplified Car Subwoofer
  • Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
  • Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
  • Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
 
Break Your Subwoofer In Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.  
  • 8-inch 800-Watt subwoofer
  • Class A/B built-in amplifier
  • MOSFET power supply
  • RCA & speaker level input
  • Phase control
  • Bass boost
  • Low pass filter
  • Remote subwoofer control
 
  • Full Range 5.25" 2-Way Speaker Pair
  • 200 Watts MAX 100 Watts RMS Power Handling per Pair
  • 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
  • Poly Injection Woofer Cone and Rubber Surround
  • 1 Tweeter Per Speaker
  • Sold in Pairs
 
  • Full Range 4" 4-Way Speaker Pair
  • 250 Watts MAX 125 Watts RMS Power Handling per Pair
  • 120 Hz to 20 kHz Frequency Response and 90dB Sensitivity
  • Poly Injection Woofer Cone and Rubber Surround
  • 2 Tweeters and 1.18 inch Mylar Cone Midrange Per Speaker
  • Sold in Pairs

Entry level 4 inch Coaxial speaker with IMPP Cone

The PULSE4-V0: Pulse 4 Inch Coaxial Speaker are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.  

Specifications

  • 4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
  • Peak Power output – 40 Watts
  • RMS Frequency Response: 100HZ – 20KHZ
  • Sensitivity 83dB
  • Mounting Diameter 3.7” (95MM)
  • Mounting Depth 1.7” (44MM)
  • Impedance : 4 OHMS
  • Spade Terminal allows easy connection of speaker Cable.
  • PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
  • Torsion basket featuring snap on mounting tabs for greater installation flexibility.
  • IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.
  • 50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ
  • Plays Bluetooth/CD/USB, MP3, WMA, FM/AM, Digital Media from Smart Phones
  • Compatible with Audio out from Smart Phones and MP3 Players
  • USB, Aux, Input
  • Front & Rear Pre Amp Outputs
  • Wireless Remote
  • Bluetooth Hands Free, Make and receive calls, Bluetooth Audio Streaming. Play and control music and apps like Spotify/Pandora wirelessly
  • 50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ
  • No CD or DVD Player, Plays Bluetooth/USB, MP3, WMA, FM/AM, Digital Media from Smart Phones
  • Compatible with Audio out from Smart Phones and MP3 Players
  • USB, Aux, Input
  • Front & Rear Pre Amp Outputs
  • Detachable Front Panel, Wireless Remote, USB Charging
  • Bluetooth Hands Free, Make and receive calls, Bluetooth Audio Streaming. Play and control music and apps like Spotify/Pandora wirelessly
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information