BOSS Audio Single Din LED Illumination PD12LED

AED 279.00
admin

Phantom – 10″ DUAL Voice Coil (4 Ohm) 2100W Subwoofer. (Sold Single)

Category:
  • One 10″ Woofer with DUAL 4 ohm Voice Coil
  • 2100 Watts MAX 1050 Watts RMS Power Handling
  • 88dB Sensitivity, 34 Hz Resonant Frequency
  • Poly Injection Cone and Rubber Surround
  • Works in .65 CuFt Sealed or 1 CuFt Ported enclosure

Reviews

There are no reviews yet.

Be the first to review “BOSS Audio Single Din LED Illumination PD12LED”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsBOSS Audio Single Din LED Illumination PD12LED removeBoss Audio System Phantom - 12" DUAL Voice Coil (4 Ohm) 2600W Subwoofer. (Sold Single) P129DC removeBOSS Audio Systems BAB8 Amplified Car Subwoofer removeBOSS Audio Systems PC65.2C 500 Watt Per Pair, 6.5 Inch, Full Range, 2 Way Car Component Speaker System with 2 Tweeters and 2 Crossovers removeBoss Audio System 656BCK removeBOSS Audio Systems NX424 250 Watt Per Pair, 4 Inch, Full Range, 4 Way Car Speakers Sold in Pairs remove
ImageBOSS Audio Systems BAB8 Amplified Car Subwoofer
SKU
Rating
PriceAED 279.00AED 329.00AED 499.00AED 299.00 AED 199.00AED 99.00
Stock

Out of stock

Out of stock

AvailabilityOut of stockOut of stock
Add to cart

DescriptionPhantom - 10" DUAL Voice Coil (4 Ohm) 2100W Subwoofer. (Sold Single)Boss Audio System Phantom - 12" DUAL Voice Coil (4 Ohm) 2600W Subwoofer. (Sold Single) P129DC

BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

Phantom 6.5" 2-Way 500W Component Speakers. (Sold in Pairs)Single-DIN, CD/MP3 Player BluetoothOnyx 4" 4-Way 250W Full Range Speakers. (Sold in Pairs)
Content
  • One 10" Woofer with DUAL 4 ohm Voice Coil
  • 2100 Watts MAX 1050 Watts RMS Power Handling
  • 88dB Sensitivity, 34 Hz Resonant Frequency
  • Poly Injection Cone and Rubber Surround
  • Works in .65 CuFt Sealed or 1 CuFt Ported enclosure
 
  • One 12" Woofer with DUAL 4 ohm Voice Coil
  • 2600 Watts MAX 1300 Watts RMS Power Handling
  • 88dB Sensitivity, 28 Hz Resonant Frequency
  • Polypropylene & Paper Cone and Rubber Surround
  • Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
BOSS Audio Systems BAB8 Amplified Car Subwoofer
  • Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
  • Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
  • Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
 
Break Your Subwoofer In Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.  
  • 8-inch 800-Watt subwoofer
  • Class A/B built-in amplifier
  • MOSFET power supply
  • RCA & speaker level input
  • Phase control
  • Bass boost
  • Low pass filter
  • Remote subwoofer control
 
  • Component 6.5" 2-Way Speaker Pair
  • 500 Watts MAX 250 Watts RMS Power Handling per Pair
  • 65 Hz to 20 kHz Frequency Response and 94dB Sensitivity
  • Electroplate Injection Woofer Cone and Rubber Surround
  • 1 Tweeter Per Speaker
  • Sold in Pairs
  • 50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ
  • Plays Bluetooth/CD, FM/AM, Digital Media from Smart Phones
  • Compatible with Audio out from Smart Phones and MP3 Players
  • Aux, Input
  • Front & Rear Pre Amp Outputs
  • Wireless Remote
  • Bluetooth Hands Free, Make and receive cal
  • Full Range 4" 4-Way Speaker Pair
  • 250 Watts MAX 125 Watts RMS Power Handling per Pair
  • 120 Hz to 20 kHz Frequency Response and 90dB Sensitivity
  • Poly Injection Woofer Cone and Rubber Surround
  • 2 Tweeters and 1.18 inch Mylar Cone Midrange Per Speaker
  • Sold in Pairs
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information