Boss Audio System Phantom – 12″ DUAL Voice Coil (4 Ohm) 2600W Subwoofer. (Sold Single) P129DC

AED 329.00
admin

Boss Audio System Phantom – 12″ DUAL Voice Coil (4 Ohm) 2600W Subwoofer. (Sold Single) P129DC

Category:

 

  • One 12″ Woofer with DUAL 4 ohm Voice Coil
  • 2600 Watts MAX 1300 Watts RMS Power Handling
  • 88dB Sensitivity, 28 Hz Resonant Frequency
  • Polypropylene & Paper Cone and Rubber Surround
  • Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure

Reviews

There are no reviews yet.

Be the first to review “Boss Audio System Phantom – 12″ DUAL Voice Coil (4 Ohm) 2600W Subwoofer. (Sold Single) P129DC”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsBoss Audio System Phantom - 12" DUAL Voice Coil (4 Ohm) 2600W Subwoofer. (Sold Single) P129DC removeBOSS Audio Car Speakers - Sold in Pairs, Easy Mounting 5.25" 200 Watts CH5520 removeBOSS Audio Single Din LED Illumination PD12LED removePULSE12-V0 – 12 Inch Subwoofer removePULSE4-V0: Pulse 4 Inch Coaxial Speaker removeBDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver remove
ImagePULSE4-V0: Pulse 4 Inch Coaxial SpeakerBDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver
SKU
Rating
PriceAED 329.00AED 89.00AED 550.00AED 477.00AED 83.00AED 259.41
Stock

Out of stock

AvailabilityOut of stock
Add to cart

DescriptionBoss Audio System Phantom - 12" DUAL Voice Coil (4 Ohm) 2600W Subwoofer. (Sold Single) P129DCChaos Exxtreme 5.25" 2-Way 200W Full Range Speakers. (Sold in Pairs)Phantom - 12" DUAL Voice Coil (4 Ohm) 1600W Subwoofer. (Sold Single)The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.
  • PULSE4-V0: Pulse 4 Inch Coaxial Speaker
  • Easy upgrade
  • Complete with grills
  • Model: BDPRO4T-V0
  • Pro Audio compression horn driver
  • 107dB Sensitivity
  • 150 Watts RMS
  • 300 Watts Max
  • 1.5kHz – 20kHz Response
Content 
  • One 12" Woofer with DUAL 4 ohm Voice Coil
  • 2600 Watts MAX 1300 Watts RMS Power Handling
  • 88dB Sensitivity, 28 Hz Resonant Frequency
  • Polypropylene & Paper Cone and Rubber Surround
  • Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
  • Full Range 5.25" 2-Way Speaker Pair
  • 200 Watts MAX 100 Watts RMS Power Handling per Pair
  • 100 Hz to 18 kHz Frequency Response and 90dB Sensitivity
  • Poly Injection Woofer Cone and Rubber Surround
  • 1 Tweeter Per Speaker
  • Sold in Pairs
 
  • One 12" Woofer with DUAL 4 ohm Voice Coil
  • 1600 Watts MAX 800 Watts RMS Power Handling
  • 85dB Sensitivity, 26 Hz Resonant Frequency
  • Polypropylene & Paper Cone and Rubber Surround
  • Works in .65 CuFt Sealed or 1.5 CuFt Ported enclosure
  • Blue LED Illumination

PULSE12-V0 - 12 Inch Subwoofer

Low budget doesn’t have to mean low performance! The PULSE12 is part of the series of affordable subwoofers that deliver all of the brand values synonymous with VIBE.

The same wide roll foam surround technology found in our SLICK series subwoofers allows huge excursion and delivery of powerful bass, this paired with our custom tooled duscap for added rigidity and harmonised engineering or voice coil, spider, cone and magnet allows deep low frequencies and accurate bass reproduction.

High temperature single 4Ω voice coils deliver maximum flexibility with a wide range of amplifiers including bridged onto any of our multi-channel Powerbox amplifiers.

 

Specification

  • - 350 Watts RMS
  • - 1050 Watts Peak
  • - 2100 Watts SPL (BURP)
  • - Single 4Ω
  • - Pressed paper Cone
  • - PP Dome Dustcap
  • - 1.5″ OFC Voice Coil
  • - Poly Cotton Spider
  • - Bumped Backplate
  • - Butyl Foam Surround

Entry level 4 inch Coaxial speaker with IMPP Cone

The PULSE4-V0: Pulse 4 Inch Coaxial Speaker are the new entry level range from Vibe. Designed to be extremely efficient to produce the best response possible without the need for an amplifier upgrade.  

Specifications

  • 4”(100mm) 2-way high efficiency coaxial speaker 120 Watt
  • Peak Power output – 40 Watts
  • RMS Frequency Response: 100HZ – 20KHZ
  • Sensitivity 83dB
  • Mounting Diameter 3.7” (95MM)
  • Mounting Depth 1.7” (44MM)
  • Impedance : 4 OHMS
  • Spade Terminal allows easy connection of speaker Cable.
  • PEI Tweeter – PEI dome tweeters deliver extended high frequency response.
  • Torsion basket featuring snap on mounting tabs for greater installation flexibility.
  • IMPP Woofer Cone – Rigid injection moulded polypropylene (IMPP) woofer cone delivers smooth, low bass and great vocal reproduction.

BDPRO4T-V0 - Compression Horn Driver

Introducing from VIBE the latest BDPRO4T-V0 – VIBE BlackDeath 4.5 inch Compression Horn Driver. The horn driver differs from a traditional pro audio tweeter by using an inverted membrane at the back of the driver, this gives a longer loading into the throat of the horn. This design has been derived from the line array style horn drivers you would see at huge concerts and adapted to work in a car audio scenario. The Aluminum horn is strategically shaped to allow extreme wideband playback from 1.5kHz to over 20kHz and with a very high sensitivity of 107dB! This means that the compression driver is one of the loudest on the market. We developed the driver to have a wonderful wide response concentrating and ensuring linear playback across its bandwidth and ensuring no loss of output or sensitivity at the high end. Be sure to pair this monster driver with any of our latest BlackDeath Pro mids for an incredible sound installation.  
 

Specifications

  • Type – Compression driver
  • Configuration – 1-way
  • Speaker size – 4.5” (115mm)
  • Frequency Response – 1.5khz – 20Khz
  • Sensitivity – 107dB
  • RMS Power – 150 watts
  • Peak Power – 300 watts
  • Sensitivity – 105dB
  • Impedance – 8Ω
  • Mounting Depth – 2.6” (67mm)
  • Mounting Diameter – 3.5” (90mm)
  • pro audio compression driver
  • composite aluminium diaphragm
  • Torsion basket featuring snap on mounting tabs for greater installation flexibility.
  • cast aluminium housing
  • wide frequency response
  • high power y35 ferrite magnet
  • spring loaded terminals

Frequency Response

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information