FetHead Phantom is an ultra-low noise, high-quality, in-line microphone preamplifier. It provides improved sound for condenser microphones. Small, compact, but powerful, Fethead Phantom utilizes tried and true FET technology to deliver up to 18dB of clean boost. No more cranking your mic preamp and adding unwanted noise to get your microphone to an acceptable volume. Boost your microphone!
FetHead Phantom is an ultra-low noise, high quality, in-line microphone preamplifier. It provides improved sound for condenser microphones. Small, compact, but powerful, Fethead Phantom utilizes tried and true FET technology to deliver up to 18dB of clean boost. No more cranking your mic preamp and adding unwanted noise to get your microphone to an acceptable volume. Boost your microphone!
Which microphones benefit
FetHead Phantom is specially designed for condenser microphones. It works very well with all condenser microphones. FetHead Phantom is also an indispensable tool for mobile recording and a real upgrade for camera microphone preamps, because it lowers the noise floor.
Operation
Your Fethead Phantom will latch straight onto any XLR equipped microphone, or anywhere else in the signal path between microphone and preamp/mixer. The electronics are housed in a robust metal chassis with a balanced female XLR input and a balanced male XLR output, rugged enough for use at home, in the studio or on tour.
Phantom power distribution
FetHead’s Phantom circuit uses 48V phantom power but also passes it on from its input to the microphone. Your condenser mic is powered with the same phantom power.
Specifications:
Preamp for condenser microphones
Low noise Class A FET amplifier
18 dB amplification (@3000 Ohm load)
Balanced XLR input/output
Lots of headroom
Frequency response 30hz-100khz (+/- 1dB)
Z-in 1000 Ω
Circuit is powered with 24-48V phantom power
Reviews
There are no reviews yet.
Be the first to review “TRITON Fethead PHANTOM” Cancel reply
FetHead Phantom is an ultra-low noise, high-quality, in-line microphone preamplifier. It provides improved sound for condenser microphones. Small, compact, but powerful, Fethead Phantom utilizes tried and true FET technology to deliver up to 18dB of clean boost. No more cranking your mic preamp and adding unwanted noise to get your microphone to an acceptable volume. Boost your microphone!
BOSS Audio Systems Elite B653 6.5 Inch Car Speakers - 300 Watts of Power Per Pair, 150 Watts Each, 3 Way, Sold In Pairs, Easy Mounting
The C-1 microphone is a home recording enthusiast’s dream come true! This professional-quality condenser microphone is designed to capture your sounds with incredible realism, sensitivity and accuracy. With the C-1’s outstanding cardioid pickup pattern for excellent sound source separation and feedback rejection, these ultra-low noise mics are an excellent choice for any recording scenario – and rugged enough to go the distance! With a handy swivel stand mount included in the sleek transport case, the C-1 just may be the only microphone your studio will need.
FIFINE Wireless Microphone System,Fifine Wireless Microphone set with Headset/Lavalier Lapel Mics, Beltpack Transmitter/Receiver,Ideal for Teaching, Preaching and Public Speaking Applications.(K037B)
Yamaha Classical Guitar, Brown - C40
FetHead Germaniumis high quality in-line microphone preamplifier. It provides a punchy and direct, ‘larger than life’ germanium sound for dynamic and ribbon microphones. Sounding full and rich it is reminiscent of much higher priced vintage gear, making FetHead Ge's desirable coloration a really great addition to (interface) preamps which sound rather neutral. Our FetHead Germaniumutilizes tried and true FET technology combined with a hand selected “New Old Stock” Germanium transistor to deliver 29dB's of germanium flavored boost.
Content
Preamp for condenser microphones
FetHead Phantom is an ultra-low noise, high quality, in-line microphone preamplifier. It provides improved sound for condenser microphones. Small, compact, but powerful, Fethead Phantom utilizes tried and true FET technology to deliver up to 18dB of clean boost. No more cranking your mic preamp and adding unwanted noise to get your microphone to an acceptable volume. Boost your microphone!
Which microphones benefit
FetHead Phantom is specially designed for condenser microphones. It works very well with all condenser microphones. FetHead Phantom is also an indispensable tool for mobile recording and a real upgrade for camera microphone preamps, because it lowers the noise floor.
Operation
Your Fethead Phantom will latch straight onto any XLR equipped microphone, or anywhere else in the signal path between microphone and preamp/mixer. The electronics are housed in a robust metal chassis with a balanced female XLR input and a balanced male XLR output, rugged enough for use at home, in the studio or on tour.
Phantom power distribution
FetHead's Phantom circuit uses 48V phantom power but also passes it on from its input to the microphone. Your condenser mic is powered with the same phantom power.
Specifications:
Preamp for condenser microphones
Low noise Class A FET amplifier
18 dB amplification (@3000 Ohm load)
Balanced XLR input/output
Lots of headroom
Frequency response 30hz-100khz (+/- 1dB)
Z-in 1000 Ω
Circuit is powered with 24-48V phantom power
Cone: made from polyurethane, The B653 6.5-Inch car speakers provide a resilient and durable material that can offer great sound with the advantage of long-lasting speakers
Voice coil: our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. Making our voice coils with this material gives our speakers The advantage of longer play times with lower weights
Surround: we use rubber in a lot of our speakers. It has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear
STAMPED BASKET: The stamped basket offers a strong and rigid platform allowing the listener to hear clean and clear
Tweeter: a piezoelectric tweeter is more resistant to overloads and can be used without a crossover due to its’ electrical property
The Behringer C-1 microphone is a home recording enthusiast’s dream come true! This professional-quality condenser microphone is designed to capture your sounds with incredible realism, sensitivity and accuracy. With the C-1’s outstanding cardioid pickup pattern for excellent sound source separation and feedback rejection, these ultra-low noise mics are an excellent choice for any recording scenario – and rugged enough to go the distance! With a handy swivel stand mount included in the sleek transport case, the C-1 just may be the only microphone your studio will need.
What is a Condenser Mic?
Condenser microphones are the ideal choice for capturing vocals and acoustic instruments. They’re the primary type of microphone used in recording studios and radio stations. Behringer C-1 mics are capable of capturing much more detail than most dynamic microphones because of their wider, flatter frequency response. Another difference between condenser and dynamic mics is they contain active circuitry that requires phantom power (+48 V) for operation. You can power your C-1 using any phantom power equipped BEHRINGER XENYX mixer, plus enjoy the benefits of our state-of-the-art XENYX mic preamps.
Why the C-1?
Behringer C-1 microphone is an affordable, high-quality way to get what you really hear down on tape (or in bits). Thanks to the pressure gradient transducer and shock-mounted large diaphragm capsule, the C-1 delivers an open, transparent sound with excellent transient response. Featuring a superb cardioid (heart-shaped) pickup pattern, the C-1 picks up your source signal, while rejecting off-axis sounds that can ruin an otherwise perfect recording.The C-1 truly delivers on the promise of noise-free transmission, with the utmost transparency – and features an LED that shows you when the mic is receiving phantom power, taking the guesswork out of the equation.
But That’s Not All…
The Behringer C-1 microphone is designed to be your go-to condenser mics for many years to come. The tough, die-cast metal body can withstand all the rigors of those late-night recording marathons – and the included carrying case ensures they always travel in safety and style.The studio-grade C-1 condenser microphone is an excellent choice for both live and studio applications, and available at a price that will leave you with enough cash left over to secure other recording essentials. Check out the incredible C-1 at a dealer near you.
FIFINE Wireless Microphone System,Fifine Wireless Microphone set with Headset/Lavalier Lapel Mics, Beltpack Transmitter/Receiver,Ideal for Teaching, Preaching and Public Speaking Applications.(K037B)
UHF Frequencies--The wireless lapel microphone system has 20 frequencies selection for seamless, interference-free operation.An easy-to-read LCD information display provides constant monitoring of system operation, Receiver battery condition indicators with low-battery warnings.
Convenient and easy to use-- No static,no drop out with use at a distance of 40-65 feet.With unique paired ID synchronization for each wireless transmitter and receiver make setup easy.Setting up a wireless mic is as simple as plugging in a wired microphone.
Wireless Headset & Lavalier--Headset microphone fits securely for active speakers and vocal performers.Lavalier microphone with included tie clip offers low visibility and hands-free use.optimized for Houses of Worship in a church preaching,YouTube videos,and classroom and presentation applications.
Versatile and Compatible Microphone-Work with mixers, pa speakers, electric guitar amplifiers and sound boards with 1/4'' interface to output the sound, ideal for teaching lectures,conference speech, visiting guide.With included 1/4" to 1/8" adapter-cable, suit for camera equipped 3.5mm mic jack recording.
What You Get--Wireless microphone set included headset microphone and Clip-on Lavalier Microphone Body pack Transmitter, Receiver with 1/4'' Plug,Solid metal collar clip and windscreen reduces plosives, wind, and breath sounds.Female 1/4" to 1/8" TRS adapter converter cord (for camera). 1/4" to 1/8" TRRS adapter cable (for smartphone).
Yamaha Classical Guitar, Brown - C40
Features
Full-size classical designed for beginners
Meranti body wood
Spruce top
22.8" scale length
Dovetail neck joint
Nato neck
Rosewood fretboard
18 frets
2.0625" nut width
Rosewood bridge
Pearloid tuners
Chrome hardware
UTF natural finish
Case not included
Create incredibly impressive musical tunes and notes using the Yamaha Classical C-40 Guitar. Crafted using premium quality materials, it ensures long-lasting use. It has a high-quality ultra-thin gloss finish that gives it a stylish and elegant visual appeal. The musical instrument is designed with contorted neck leads that provide optimum comfort during use.
Impressive Design
Enjoy long hours of musical jam sessions by strumming the Yamaha C-40 guitar. It is constructed from premium quality materials that offer reliable use over an extended length of time. Designed with contorted neck leads, it ensures relaxed hand positioning and comfortable use. It has a high-quality gloss finish that gives it a premium appeal.
Travel-Friendly Design
The Yamaha Classical C-40 guitar has a lightweight design that makes it convenient to carry outdoors and on holidays. The musical instrument can be easily lifted up and carried in a guitar bag or in your hand without feeling fatigued. These design elements make it an incredibly valuable item for avid guitarists as they can compose and create impressive musical tunes anytime, and anywhere.
Preamp with germanium harmonics
FetHead Germaniumis high quality in-line microphone preamplifier. It provides a punchy and direct, ‘larger than life’ germanium sound for dynamic and ribbon microphones. Sounding full and rich it is reminiscent of much higher priced vintage gear, making FetHead Ge's desirable coloration a really great addition to (interface) preamps which sound rather neutral. Our FetHead Germaniumutilizes tried and true FET technology combined with a hand selected “New Old Stock” Germanium transistor to deliver 29dB's of germanium flavored boost.
Germanium Flavor
Germanium transistors were widely used in earliest transistor designs by Neve, EMI, Telefunken, and Fairchild, and have developed a reputation for a decidedly vintage mojo that remains sought after today.
We created a novel hybrid circuit that consists of low noise JFETs and a hand-selected ‘new old stock’ germanium transistor to take full advantage of the "Germanium" sound and at the same time achieve the same sonic quality we are known for. A low impedance output buffer provides output drive to long cables.
Operation
Your Fethead Germanium will latch straight onto any XLR equipped microphone, or anywhere else in the signal path between microphone and preamp/mixer. The electronics are housed in a robust metal chassis with a balanced female XLR input and a balanced male XLR output, rugged enough for use at home, in the studio or on tour.
Protects the microphone
Some older ribbon microphones do not tolerate phantom power. Fethead uses phantom power to power its circuitry, but doesn’t pass phantom power to the microphone, so rest assured your ribbon mics are safe.
Reviews
There are no reviews yet.